Automatic terminal machine

Automatic terminal machine

Fully automatic terminal machine is a more convenient machine. We should also know this. Fully automatic mechanical equipment is of great help and can save more It can also increase the output of the factory, and it can also help the factory to temporarily relieve the problem of not being able to find workers. However, when we use the fully automatic terminal machine, we will also find a problem. Some fully automatic terminals After the machine has been used for a period of time, there will be relatively loud noises. We should all be aware of this! So what are the specific reasons for the formation?

What are the precautions when using the automatic terminal machine mute terminal machine mute terminal machine. The terminal machine is often connected. It may be the terminal machine, the main board of the terminal machine or the inverter is broken. It is better to find professional personnel to repair. Dongguan Julun Machinery Co., Ltd. specializes in the production of wire harness processing equipment. The main products are: automatic terminal crimping machine (single-head / double-head / dipping), computer wire cutting, peeling and twisting machine, silent Terminal crimping machine, high-speed silent high-speed terminal machine with stripping, terminal machine mold, blade and mechanical accessories and other wire harness processing equipment.

Generally, it is normal to have fine noise. If it is a loud one, then there are these two problems, a. There is abrasion between certain parts and components of the terminal machine, which leads to increased conflicts; b. The screw of the terminal machine is loose during work, causing the parts to vibrate and become rugged.

What is the technological process of the automatic terminal machine? Turn on the power switch of the automatic terminal, and the power indicator light is on. Pay attention to whether there are obvious abnormal noises inside and outside the machine. If the operation is suspended, ask the maintenance personnel to determine whether maintenance is required. Knife selection and installation: operated by designated personnel. Before installing the tool, you need to manually compare whether the selected tool matches. The tool can only be installed after the comparison is correct. After installing the tool, it must be tested manually. First of all, turn off the power of the automatic terminal machine, press the down touch button, and use the dedicated board to manually move the master and slave wheels to greatly increase the stamping stroke of the professional terminal press. If the hand does not move, consider whether the pressure is too high or there are other problems, check and adjust to normal. Before operation, check and confirm that the locking screws are not loose.

For such problems, what we have to do is to find a solution. If we want to prevent the terminal machine from being disturbed by noise, we must first choose a reasonable tool and improve its installation accuracy. ; At the same time, we must improve the cutting process of the terminal machine. If it is a slender workpiece, try to choose ninety degrees for cutting. In this way, the noise problem of the terminal machine should be alleviated.

Automatic terminal machine

Automatic terminal machine failure: the length of the wire cut is inconsistent. A: The wire feed wheel is pressed too tightly or too loosely. Countermeasure: Adjust the straightening machine so that it can be straightened and sent out smoothly. There are two differences between a professional terminal machine and a fully automatic terminal machine. The first is the characteristics of the automatic terminal machine: the automatic terminal machine is an automatic machine that integrates wire feeding, wire cutting, stripping, terminal punching and other chemical machinery. The automatic terminal machine was developed and manufactured in Japan as early as, the operator only needs to touch the screen button to send information to the server, and then to the motor. The fully automatic terminal machine can complete all actions such as wire feeding, wire cutting, stripping, and terminal tapping within one second. As a humanized and intelligent high-end technology product, the automatic terminal machine is suitable for large, medium and small enterprises that need to use wire harnesses. It can save a lot of labor and is several times more efficient than semi-automatic terminal machines.

The daily maintenance precautions of the automatic terminal machine have been introduced here. You can learn more about it, and we should pay more attention to it when we use it. This is for us There is better assistance. Be careful when using the automatic terminal machine. If you need to buy automatic terminal machines, automatic pipe cutting machines, corrugated pipe cutting machines and other mechanical equipment, you can call Contact us, and we also have punctured terminals, terminal molds, terminal copper strips and other accessories, please contact us if you have any needs

Automatic terminal machine

Which brand of Tangshan terminal machine is better? The professional terminal machine is well done by Dongguan Julun Machinery Co., Ltd. Many people report that their professional terminal processing is good, you can call for details; in fact, Dongguan Julun Machinery Co., Ltd. has a good price/performance ratio. , The service is also good? It’s silly to ask this. I’m all advertising for my own home. I really want to know that I’m looking for groups like end-of-line processing groups on qq. If there will be many peers communicating in it, you know the professional automatic terminal machine Julun. Machinery is very good, you can choose: Dongguan Julun Machinery Co., Ltd. is a high-tech enterprise mainly engaged in the development, design, manufacturing and sales of industrial robots and intelligent equipment.

It is necessary to add butter to the crimping part of the automatic terminal machine every week, and apply it evenly on the surface of the high-speed bearing and around the pressure block

?During the operation of the ultra-quiet terminal machine, if the ultra-quiet terminal machine is abnormal, you must immediately turn off the power and report to the maintenance personnel for maintenance and debugging. It is strictly forbidden for non-designated personnel to commission or disassemble mechanical parts without authorization. During the operation of the machine, it is forbidden for fingers or any part of the body to enter between the movable parts or professional pressing molds. When necessary, the ultra-quiet terminal machine must be stopped, and the power switch must be turned off before operation. When two or more people are beside the equipment at the same time, one person should give command and cooperate with each other.

Automatic terminal machine

Automatic terminal machine

How many square lines should be used and how many tonnage professional terminal machines, terminal machines can be classified into automatic terminal machines, connectingStripping and tapping Terminal machine、Ultra-quiet terminal machine, pneumatic terminal machine, wiring terminal machine, computer wire automatic stripping machine, pin terminal machine, gold wire terminal machine, etc. The automatic terminal machine can be divided into: 1. Automatic single-head crimping terminal machine (using PLC or single-chip control, this type of domestic equipment can realize about 5000pcs wire cutting, stripping, single-end crimping terminal per hour, and automatic Detecting the quality of terminal crimping, which is more popular in the domestic market